1.8195 Spring Steel Wire
Size Range | Diameter(mm) | Thickness (mm) | Width (mm) | Length(mm) |
Round | 20-420 | - | - | 2000-5800 |
Square | 20-420 | - | - | 2000-5800 |
flat | - | 20-50 | 50-600 | 2000-5800 |
Chemcial composition:
Grade | C | Mn | Si | P | S | Cr | Ni | Cu |
1.8195 | 0.46- 0.54 | 0.50- 0.80 | 0.17- 0.37 | 0.025 max | 0.025 max | 0.80- 1.10 | 0.35 max | 0.25 max |
Packing details | In seaworthy packing, as your requirement. |
Delivery details | within 10-50 days |
>>>Heat Treatment: Tensile Strength Rm (Mpa): 1275 min Yield Strength Rp0.2 (Mpa): 1130min Elongation A5 (%): 10 min Area Reduction Ratio C (%): 40 min |
|
| >>>Steel Grades ·1.8195 · 51CrV4 |
Mill′s test certificate: EN 10204/3.1 with all relevant data reg. chem. composition, mech. properties and results of testing. | Application: Spring steel refers to steel due to the elasticity in the quenched and tempered condition, and specifically for the manufacture of springs and elastic components. Spring steel depends on its ability to elastically deform, i.e., within the prescribed range, the ability to withstand a certain elastic deformation so that the load does not occur in the permanent deformation after the load is removed.Spring Steel is typically used because of its’ high yield strengths, resistance to deformation and its ability to return to its original shape. |
Contact Information:
Mobile/Whatsapp: +86-
Skype: summerxn at outlook.com
Website:
Email: Summer at fushunspecialsteel.com